1 second | (s) | = | 1 Hz or 1000ms |
100 milliseconds | (ms) | = | 10 Hz |
10 milliseconds | (ms) | = | 100 Hz |
1 milliseconds | (ms) | = | 1 kHz or 1000us |
0.1 milliseconds | (ms) | = | 10 kHz |
10 microseconds | (μs) | = | 100 kHz |
1 microseconds | (μs) | = | 1000Khz or 1Mhz |
0.1 microseconds | (μs) | = | 10Mhz |
10 nanoseconds | (ns) | = | 100Mhz |
14:50:01 < tsaavik> hey all, I'm used to using a cheap usb scope. I just got a
tek2213 analog scope this weekend and am having trouble
doing the math on the div marks, can anyone point me
towards a tutorial/cheatsheet/guide to getting better at
this?
14:50:25 < SpeedEvil> you mean what the horizontal divisions mean?
14:51:09 < tsaavik> yes, i'm having trouble fully understanding it, and doing
the math :D
14:51:15 < SpeedEvil> set it to 50us/division, and if a wave takes 4.5
divisions to make a complete cycle, then it takes 4.5*50
= 220us
14:51:23 < SpeedEvil> The frequency is 1/220us
14:51:39 < SpeedEvil> Or about 4.5khz
14:57:07 < SpeedEvil> volts work basically the same
14:57:12 < tsaavik> so really, i can think of timebase as a scale like volts
14:58:02 < SpeedEvil> one wrinkle - once you twiddle the 'variable'
settings on teh volts or timebase settings, you have no
easy way (typically) of knowing it's set to
3.8us/division (or so)
15:00:33 < SpeedEvil> you mean like the "cal" knobs?
http://tinyurl.com/ppt6rk (ignore the yellow boxes)
15:06:03 < SpeedEvil> yes - when horizontal, that
indicates the scope is calibrated - the writing on the knobs means
something
15:06:39 < SpeedEvil> if you twiddle a knob, then
it might be 2v/division, on the 1v/division setting, for example
module. Which should be simple, as Casper said.
15:51:49 so really, once i convert something to ms its 1:1 for khz
15:52:17 so my goal should be to get to ms level, and not worry about
whole seconds
15:53:07 1KHz = 1000Hz
15:53:47 though yes, you can do .1ms = 10KHz - rateher than .0001s
= 10000Hz